P - 0934

Turning Lathe for Cylinders

Companies:

Brickyards

Purpose

  • Purpose of the machine is machining of cylinders with diameter of 500 up to 1500 mm and length of L = 500 up to 1500 mm on the same spot without unmounting the cylinders in industries for production of bricks, tiles and similar products. During the process of exploitation, cylinders wear unequally, so quality and homogeneousness of the soil is bad.

  • Turning lathe has possibility to choice the optimal feed during machining, witch is achieved with frequency regulator built in the lathe.

  • To achieve optimal speed of turning, reducer is used, who reduces revolutions of the cylinder.

  • So far, leveling of cylinders was done with grinding. This operation needs planty of time. With turning lathe time needed for leveling is small, and stoppage of the production process is small also. For smaller time of machining the cylinders, two tools are used.

  • Because of the less time needed for machining compared to previous ways of machining the cylinders, this machine will pay back itself in short period of time.

TECHNICAL CHARACTERISTIC

 

Basic date

Diameter of turning mm  

500 - 1500

Length of turning

mm  

500 - 1500

Cutting speed m/min  

100

Weight

kg  

800

Reducer (for main moving) Power kW   4
Number of revolutions (rpm) rpm   21 - 64

Feed

Longitudinal

mm/rev.   0,3 - 0,6
Transversal (depth of cut) mm   0,5 - 1
Reducer (for feed)

Power

kW   0,75
Number of revolutions rpm   1500
 

 Contact Us |Back| ©2005 Davit ESB doo Skopje